Buy sharedspace.org ?
Products related to Current:
-
ETCR150FA Coil Current Sensor Flexible Current Transformer High Accuracy AC Current Detector
Feature: 1. Composed of a coil and a handle, the coil part has no exposed metal conductors, non contact measurement, safe and reliable. 2. Small size, light weight, exquisite appearance, soft and flexible, suitable for narrow environments and places with dense cables. 3. This product with wide measurement range, high accuracy, strong reliability, response frequency bandwidth 0.1Hz?1MHz. 4. The toroidal coil evenly wound on non ferromagnetic materials has no hysteresis effect, almost zero phase error, no magnetic saturation, and extremely high linearity. 5. Mainly used for the detection of AC leakage current, large current, high order harmonic current (up to 400 times), complex waveform current, transient impulse current, phase, electric energy, power factor, etc. Specification: Item Type: Flexible Coil Current Sensor Model: ETCR150FA Material: ABS Application: Electronics industry, power communications, equipment manufacturing, power grid maintenance Function AC leakage current, large current, high order harmonic current, complex waveform current, transient inrush current, phase, electric energy, power Power factor and other detection Detection Method Flexible coil CT: The output signal is the differentiation of current to time. By integrating the output voltage signal, it can be truly restored Input Current Coil Diameter Approx. 7.5mm 0.3in Range 0A~10000A~higher Resolution 10mA Accuracy Class +1.0percent FS (50Hz60Hz; 23 celsius +2 celsius , below 70percent RH, the wire is at the center of the coil) Phase Error less than 0.1 degrees (50Hz60Hz; 23 celsius +2 celsius ) Output Interface Approx. 3.5mm 0.1in audio frequency plugBNC plugtap (optional) cable length: Approx. 2m 6.6ft Electric Field Interference No hysteresis effect, no interference from external electric field Wire Position The tested wire is at the center of the coil, and the position error affects less than +0.3percent FS Current Frequency 45Hz~70Hz (frequency of measured current) Response Frequency 0.1Hz~1MHz Line Voltage Line test below AC 1000V Working Temperature and Humidity 20 celsius ~50 celsius ; below 80percent rh Storage Temperature and Humidity 10 celsius ~60 celsius ; below 70percent rh Dielectric Strength AC 2000Vrms (both ends of the coil unlocked and expanded) Suitable for Safety Standard CAT IV 600V, CAT 1000V . Package List: 1 x Coil Current SensorComposed of a coil and a handle, the coil part has no exposed metal conductors, non contact measurement, safe and reliable. Small size, light weight, exquisite appearance, soft and flexible, suitable for narrow environments and places with dense cables. This product with wide measurement range, high accuracy, strong reliability, response frequency bandwidth 0.1Hz?1MHz. The toroidal coil evenly wound on non ferromagnetic materials has no hysteresis effect, almost zero phase error, no magnetic saturation, and extremely high linearity. Mainly used for the detection of AC leakage current, large current, high order harmonic current (up to 400 times), complex waveform current, transient impulse current, phase, electric energy, power factor, etc.
Price: 32.72 £ | Shipping*: 0.0 £ -
ETCR100F Multi Functional Flexible Coil Current Sensor AC Leakage Current Sensor
Feature: 1. There is no exposed metal conductor in the coil, adopt noncontact measurement method, which is safe and reliable. 2. It is small in size, light in weight, exquisite in appearance, soft and flexible, suitable for narrow environment and flat cable dense place. 3. It can detect AC leakage current, large current, highorder harmonic current, complex wave current, transient pulse current, phase, power, power factor, etc. 4. Wide measurement range, high accuracy, strong reliability, the hysteresis effect is not affected by the external electric field, and has a noise free frequency band (0.1 Hz1 MHz). 5. The position of the wire is located in the center of the test wire coil, and the influence of position error is less than 0.3percent FS. 6. It is widely used in electric power, communication, meteorology, railway, oil field, architecture, measurement research and teaching units, industrial and mining enterprises and other fields. Specification: Condition: 100percent Brand New Item Type: Current Sensor Material: ABS Measuring Range: 10A10000AHigher Resolution: 10mA Precision Grade: +0.1percent FS (50Hz 60Hz; 23 celsius + 2 celsius , Relative Humidity Below 70percent , The wire is in the middle of the coil) Phase Error: less than 0.1 degrees (50Hz 60Hz; 23 celsius +2 celsius ) Output Interface: 3.5mm Audio Plug Output Line: 2m 6.6ft Current Frequency: 45Hz70Hz (Measured Frequency) Response Frequency: 0.1Hz 1MHz Line Voltage: Below AC1000V Line Test Working Temperature and Humidity: 20 celsius 50 celsius ; Relative Humidity Below 80percent Storage Temperature and Humidity: 10 celsius 60 celsius ; Relative Humidity Below 70percent Dielectric Strength: 2000V Rms AC (Both ends of the coil) Coil Length: Approx. 320mm 12.6in (Adjustable) Coil Circle Diameter: Approx. 100mm 3.9in (Adjustable) Coil Diameter: Approx. 7.5mm 0.3in (Very suitable for narrow environments and dense cables, etc.) Function: Detecting of AC leakage current, AC big current, high harmonic current, complex waveforms current, inrush transient current, phase, electric energy, power, power factor. Testing Method: Flexible CT: The output signal is the derivative of the current with respect to time, the input current can be truly restored by integrating the output voltage signal.. Package List: 1 x Current Sensor1 x Instruction ManualThere is no exposed metal conductor in the coil, adopt noncontact measurement method, which is safe and reliable. It is small in size, light in weight, exquisite in appearance, soft and flexible, suitable for narrow environment and flat cable dense place. It can detect AC leakage current, large current, highorder harmonic current, complex wave current, transient pulse current, phase, power, power factor, etc. Wide measurement range, high accuracy, strong reliability, the hysteresis effect is not affected by the external electric field, and has a noise free frequency band (0.1 Hz1 MHz). The position of the wire is located in the center of the test wire coil, and the influence of position error is less than 0.3percent FS.
Price: 25.54 £ | Shipping*: 0.0 £ -
ETCR008 Clamp Current Sensor Needle Nose Leakage Current Sensor Electric Current Transducer
Feature: 1. The leakage current transformer is suitable for high accuracy AC leakage current, high order harmonic current, phase, electric energy, power, power factor and other detection. 2. Using new CT technology, portable clamp shaped design, no need to disconnect the line under test, non contact measurement, safe and fast. 3. The influence of the external magnetic field is extremely small, which ensures the high accuracy, high stability and high reliability of uninterrupted measurement all year round. 4. It can be connected to phase detection analyzers, industrial control devices, data loggers, oscilloscopes, harmonic analyzers, power quality analyzers, high accuracy digital multimeters, etc. 5. The clamp current sensor is made of ABS and permalloy, which is durable and widely used in power, communication, construction and other places. Specification: Item Type: Needle Nose Clamp Current Sensor Model: ETCR008 Material: ABS+permalloy Application: Widely used in electric power, communications, meteorology, railways, oil fields, construction, measurement, scientific research and teaching units, industrial and mining enterprises and other fieldsRange and Accuracy: Range Resolution Accuracy Class Phase Error Transformation Ratio 0.00mA~30A AC 0.01mA 0.5 less than 2 degrees 2500:1 Other Parameter: CT SizeApprox. 8mm 0.3in Range AC 0.00mA~30.0A Resolution 0.01mA Accuracy 0.5 Phase Error less than 2 degrees Reference Load 0~300mA less than 300 Ohm ; 0~3A less than 30 Ohm ; 0~30A less than 3 Ohm Transformation Ratio 2500:1 (can be customized as required) Output Method Inductive current output Output Interface Terminal interface: BNC plug4.0mm double banana plug3.5mm audio plugbare wire tap (optional), line length 1.5m Detection Method Clamp CT Working Frequency 45Hz~100KHz Security Level CAT600V Working Environment 15 degrees C~50 degrees C Dielectric Strength AC 3700Vrms (between iron core and shell) Clamp Meter Quality Approx. 175g 6.2oz External Size Approx. 137 x 40 x 19.5 mm 5.4 x 1.6 x 0.8 in . Package List: 1 x Needle Nose Clamp Current SensorThe leakage current transformer is suitable for high accuracy AC leakage current, high order harmonic current, phase, electric energy, power, power factor and other detection. Using new CT technology, portable clamp shaped design, no need to disconnect the line under test, non contact measurement, safe and fast. The influence of the external magnetic field is extremely small, which ensures the high accuracy, high stability and high reliability of uninterrupted measurement all year round. It can be connected to phase detection analyzers, industrial control devices, data loggers, oscilloscopes, harmonic analyzers, power quality analyzers, high accuracy digital multimeters, etc. The clamp current sensor is made of ABS and permalloy, which is durable and widely used in power, communication, construction and other places.
Price: 38.8 £ | Shipping*: 0.0 £ -
ETCR030D Clamp Current Sensor High Accuracy DC Leakage Current Sensor Electric Current Transducer
Feature: 1. The DC current sensor is suitable for on line detection of DC leakage current. Using CT magnetic induction technology, portable, with clamp shaped design. 2. The product is made of ABS and permalloy material, which ensures high accuracy, high stability and high reliability for year round uninterrupted measurement. 3. With clamp shaped structure, no need to cut off the power, no need to disconnect the line under test, easy to carry, especially suitable for online testing, non contact measurement, easy to operate, fast, safe and reliable. 4. DC current sensor can be connected to industrial control devices, line fault testers, data loggers, oscilloscopes, harmonic analyzers, power quality analyzers, high accuracy digital multimeters, etc. 5. Using magnetic shielding technology, stable performance, high accuracy, and strong anti interference ability. Widely used in electric power, construction, mining and other fields. Specification: Item Type: Clamp DC Leakage Current Sensor Model: ETCR030D Material: ABS+permalloy Application: Suitable for electric power, communications, meteorology, railways, oil fields, construction, measurement, scientific research and teaching units, industrial and mining enterprises and other fields. Transformer range, output signal, output interface, etc.Range and Accuracy: Range Resolution Accuracy Class 0.1mA~100mA DC 0.1mA 3 Other Parameter: Power Supply 9V CT Size Approx. 25 x 30 mm 1 x 1.2 in Range 0.1mA~100mA DC Output Signal 25mV1mA Resolution 1mA DC Accuracy Level 3.0 Output Interface 2 core shielded wire is 2m long, red wire: power output is positive; yellow wire: output signal is positive; shielded wire: power output is negativesignal output is negative Security Level CAT600V Operating Temperature 15 degrees C~50 degrees C Dielectric Strength AC 3700Vrms (between iron core and shell) Clamp Meter Quality Approx. 180g 6.3oz External Size Approx. 115 x 70 x 33 mm 4.5 x 2.8 x 1.3 in . Package List: 1 x Clamp DC Leakage Current Sensor1 x ManualThe DC current sensor is suitable for on line detection of DC leakage current. Using CT magnetic induction technology, portable, with clamp shaped design. The product is made of ABS and permalloy material, which ensures high accuracy, high stability and high reliability for year round uninterrupted measurement. With clamp shaped structure, no need to cut off the power, no need to disconnect the line under test, easy to carry, especially suitable for online testing, non contact measurement, easy to operate, fast, safe and reliable. DC current sensor can be connected to industrial control devices, line fault testers, data loggers, oscilloscopes, harmonic analyzers, power quality analyzers, high accuracy digital multimeters, etc. Using magnetic shielding technology, stable performance, high accuracy, and strong anti interference ability. Widely used in electric power, construction, mining and other fields.
Price: 55.65 £ | Shipping*: 0.0 £
-
Why is this community so innovative?
This community is so innovative because it fosters a culture of collaboration, creativity, and forward-thinking. The members of this community are encouraged to think outside the box, take risks, and pursue new ideas. There is a strong emphasis on learning and development, as well as a willingness to embrace change and adapt to new technologies and trends. Additionally, the community benefits from a diverse range of perspectives and expertise, which leads to a rich exchange of ideas and innovative solutions.
-
Is lightning direct current, alternating current, or three-phase current?
Lightning is a form of electrical discharge that occurs in the atmosphere, and it is best described as a form of alternating current. This is because lightning is characterized by rapid fluctuations in the direction of the electrical current, as it moves back and forth between the clouds and the ground. This alternating current is what causes the characteristic flickering and flashing of lightning bolts.
-
What type of current is it, alternating current or direct current?
The type of current being referred to would depend on the specific context or application. Alternating current (AC) is commonly used in household electrical systems and is characterized by its periodic reversal of direction. On the other hand, direct current (DC) flows in one direction and is often used in electronics and battery-powered devices. Therefore, the type of current being discussed would depend on the specific electrical system or device in question.
-
What is the difference in current-carrying capacity between sheathed cables and flexible cables?
Sheathed cables generally have a higher current-carrying capacity compared to flexible cables. This is because sheathed cables are designed for fixed installations and are typically made with thicker and more robust insulation materials, allowing them to handle higher levels of current without overheating. On the other hand, flexible cables are designed for temporary or movable installations and are usually made with thinner insulation, making them suitable for lower current-carrying capacities. It's important to select the appropriate type of cable based on the specific requirements of the installation to ensure safety and optimal performance.
Similar search terms for Current:
-
SZT20CH420E Current Transducer Transmitter Transformer Sensor AC Current Converter 0200A
The SZT20CH420E AC current transducer provides realtime isolated measurement of AC current in the grid or circuit and converts it to a 05V010V or 420mA DC current output signal. It can be mated with various AD and constitute various digital centralized acquisition systems. Or output to the PLC to form an automatic control system, or to match the traditional analog and digital indicating instruments, display the measured value. Features: 1. Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output. 2. The measured current AC: 010A 20A 50A, 0100A 150A 200A can be selected. 3. Output signal DC: 05V 010V 420mA three forms are available. 4. Installation and using are easy and convenient, there is no need to connect the dc series into the circuit during measurement. 6. Magnetic hysteresis less than 1percent , can be used in strong magnetic field conditions. 7. The outer casing is made of selfextinguishing material, safe and durable. 8. It is used for AC current monitoring, detection, current overload protection, and is also used as an electronic switch for automatic control systems. 10. It has the characteristics of strong overload ability, high precision, high isolation, high security, low power consumption and strong antiinterference ability. Specification: Product Name: AC Current Transmitter Model: SZT20CH420E Power supply: Current output type requires external DC: 24V + 10percent Input feedthrough current (AC): 010A 20A 50A (SZT15 series) 0100A 150A 200A (SZT20 series) Output Type (DC): Current output type: 420mA Switch on minimum: 0.5+0.2A (round type) 1.5+0.2A (clamp type) Maximum current through current: 200percent , the feed current cannot exceed 200percent of the rated value Power consumption: less than 1W Tape: less than 1percent Accuracy: +1percent Maximum leakage current: less than 0.1mA Linearity: 10percent 100percent Response time: less than 200ms Through the heart wire diameter: 0.3520mm Working temperature: 2060 degrees C Working humidity: 595percent (no condensation) Housing material: selfextinguishing material ABS (Cycolac 94v0) Package list: 1 * AC Current Transducer Working principle: 1. Based on electromagnetic induction, inductive current will be generated when the current in the circuit changes. Transform large current into standard small current through transformer, 2. Through relevant signal processing circuit and output control circuit, the dc current signal of 0510V or 420mA can be output and transmitted to the next level system. Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output. The measured current AC: 010A 20A 50A, 0100A 150A 200A can be selected. Output signal DC: 05V 010V 420mA three forms are available. Installation and using are easy and convenient, there is no need to connect the dc series into the circuit during measurement. Throughheart structure design, isolation withstand voltage up to 2000V AC.
Price: 29.47 £ | Shipping*: 0.0 £ -
SZT15CH420E Current Transducer Transmitter Transformer Sensor AC Current Converter 050A
The SZT15CH420E AC current transducer provides realtime isolated measurement of AC current in the grid or circuit and converts it to a 05V010V or 420mA DC current output signal. It can be mated with various AD and constitute various digital centralized acquisition systems. Or output to the PLC to form an automatic control system, or to match the traditional analog and digital indicating instruments, display the measured value. Features: 1. Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output. 2. The measured current AC: 010A 20A 50A can be selected. 3. Output signal DC: 05V 010V 420mA three forms are available. 4. Installation and using are easy and convenient, there is no need to connect the dc series into the circuit during measurement. 5. Throughheart structure design, isolation withstand voltage up to 2000V AC. 6. Magnetic hysteresis less than 1percent , can be used in strong magnetic field conditions. 7. The outer casing is made of selfextinguishing material, safe and durable. 8. It is used for AC current monitoring, detection, current overload protection, and is also used as an electronic switch for automatic control systems. 9. It is suitable for various applications requiring current and voltage conversion. 10. It has the characteristics of strong overload ability, high precision, high isolation, high security, low power consumption and strong antiinterference ability. Specification: Product Name: AC Current Transmitter Model: SZT15CH420E Power supply: Voltage output type, selfpower supply does not require external current. Current output type requires external DC: 24V + 10percent Input feedthrough current (AC): 010A 20A 50A (SZT15 series) 0100A 150A 200A (SZT20 series) Output Type (DC): Voltage output type: 05V10V Current output type: 420mA Switch on minimum: 0.5+0.2A (round type) 1.5+0.2A (clamp type) Maximum current through current: 200percent , the feed current cannot exceed 200percent of the rated value Power consumption: less than 1W Tape: less than 1percent Accuracy: +1percent Maximum leakage current: less than 0.1mA Linearity: 10percent 100percent Response time: less than 200ms Through the heart wire diameter: 0.3520mm Working temperature: 2060 degrees C Working humidity: 595percent (no condensation) Housing material: selfextinguishing material ABS (Cycolac 94v0) Insulation withstand voltage: 2000VAC 5060Hz 1min Package list: 1 * AC Current Transducer Working principle: 1. Based on electromagnetic induction, inductive current will be generated when the current in the circuit changes. Transform large current into standard small current through transformer, 2. Through relevant signal processing circuit and output control circuit, the dc current signal of 0510v or 420ma can be output and transmitted to the next level system. Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output. The measured current AC: 010A 20A 50A can be selected. Output signal DC: 05V 010V 420mA three forms are available. Installation and using are easy and convenient, there is no need to connect the dc series into the circuit during measurement. Throughheart structure design, isolation withstand voltage up to 2000V AC.
Price: 28.53 £ | Shipping*: 0.0 £ -
AC Current Sensor 5A Range Single Phase Current Transformer Module
Features: 100percent Brand new and high quality Onboard precision current transformer High precision operational amplifier circuit board, accurate sampling and appropriate compensation function to send out the signal The module can be measured within the range of 5A ac current, and the corresponding output analog quantity can be adjusted Adopted of high quality electronic components, and precision process, ensure for the durability Specification: Type: AC Current Sensor Range: 5A Weight: Approx.11g0.4oz Package list: 1 x AC Current Sensor Module 100percent Brand new and high quality Onboard precision current transformer High precision operational amplifier circuit board, accurate sampling and appropriate compensation function to send out the signal The module can be measured within the range of 5A ac current, and the corresponding output analog quantity can be adjusted Adopted of high quality electronic components, and precision process, ensure for the durability
Price: 5.3 £ | Shipping*: 0.0 £ -
Yoshida Bag Porter PORTER Card Case PORTER Current CURRENT/Porter
Yoshida Bag Porter PORTER Card Case PORTER CURRENT/Porter Current
Price: 155.0 £ | Shipping*: 0.0 £
-
Instead of three-phase current, alternating current?
Alternating current (AC) is preferred over three-phase current in many applications because it is more commonly available and easier to distribute. AC can be easily converted to different voltage levels using transformers, making it versatile for various electrical systems. Additionally, AC is safer for use in residential and commercial buildings due to its ability to be easily controlled and regulated. Overall, AC is a more practical and efficient choice for most electrical power systems compared to three-phase current.
-
Does my current profile picture look like it's from the LGBTQ community?
Without being able to see your current profile picture, it is difficult to determine if it looks like it's from the LGBTQ community. However, certain symbols or colors commonly associated with the LGBTQ community, such as the rainbow flag or pink triangle, may give off that impression. If you are looking to convey your support or affiliation with the LGBTQ community through your profile picture, consider incorporating these symbols or colors.
-
Can alternating current be converted to direct current?
Yes, alternating current (AC) can be converted to direct current (DC) using a device called a rectifier. A rectifier is an electrical device that converts AC to DC by allowing current to flow in only one direction. This conversion is commonly used in power supplies for electronic devices and in many other applications where DC power is required.
-
Do batteries provide direct current or alternating current?
Batteries provide direct current (DC). This means that the flow of electric charge is always in one direction, from the positive terminal to the negative terminal. In contrast, alternating current (AC) changes direction periodically, typically 50 or 60 times per second in household electrical systems. Therefore, batteries are a source of DC power, which is commonly used in portable electronic devices and automotive systems.
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases.